Xuqing Technology Ltd.
3F, No. 1, Lane 79, Yajiang Street, Wanhua District, Taipei, Taiwan
Gas Assisted Injection Molding Process Overview (1)
Extension of traditional injection molding
Shapes with hollow cross-sections in molded products
Low membrane cavity pressure process
It is a "short shot" or "full shot" process
A process that challenges traditional injection molding design criteria
https://www.xuqingtech.com/en/hot_509867.html
Gas Assisted Injection Molding Process Overview (1)
2025-04-30
2026-04-30
Xuqing Technology Ltd.
3F, No. 1, Lane 79, Yajiang Street, Wanhua District, Taipei, Taiwan
https://www.xuqingtech.com/en/hot_509867.html
Xuqing Technology Ltd.
3F, No. 1, Lane 79, Yajiang Street, Wanhua District, Taipei, Taiwan
https://www.xuqingtech.com/en/hot_509867.html
https://schema.org/EventMovedOnline
https://schema.org/OfflineEventAttendanceMode
2025-04-30
http://schema.org/InStock
TWD
0
https://www.xuqingtech.com/en/hot_509867.html
Xuqing Technology Ltd.
3F, No. 1, Lane 79, Yajiang Street, Wanhua District, Taipei, Taiwan
Gas Assisted Injection Molding Process Overview (2)
Use high pressure gas (nitrogen) to inject into the uncooled plastic
The "bubble" formed by the gas will flow in the direction of least resistance (high temperature and low pressure area)
The hollow section will eliminate the shrinkage depression on the surface of the finished product where the meat is thick
https://www.xuqingtech.com/en/hot_509868.html
Gas Assisted Injection Molding Process Overview (2)
2025-04-30
2026-04-30
Xuqing Technology Ltd.
3F, No. 1, Lane 79, Yajiang Street, Wanhua District, Taipei, Taiwan
https://www.xuqingtech.com/en/hot_509868.html
Xuqing Technology Ltd.
3F, No. 1, Lane 79, Yajiang Street, Wanhua District, Taipei, Taiwan
https://www.xuqingtech.com/en/hot_509868.html
https://schema.org/EventMovedOnline
https://schema.org/OfflineEventAttendanceMode
2025-04-30
http://schema.org/InStock
TWD
0
https://www.xuqingtech.com/en/hot_509868.html
